Sony VAIO VGN-Z690P User Manual Download Page 204

Page: 204 / 227

Troubleshooting

Display

Why did my screen go blank?

❑

Your computer screen may go blank if the computer loses power or enters a power saving mode (Sleep or Hibernate). If
the computer is in LCD (Video)

Sleep mode, press any key to bring the computer back into Normal mode. See

Using the

Power Saving Modes

(page 142)

for more information.

❑

Make sure your computer is securely plugged into a power source and turned on and the power indicator light is lit.

❑

If your computer is using battery power, make sure the battery pack is installed properly and is charged. See

Using the

Battery Pack

(page 24)

for more information.

❑

If the display output is directed to the external display, press the

keys. See

Combinations and Functions with

the Fn Key

(page 33)

for more information.

❑

During the switching process, your computer screen becomes dark and may temporarily show some noise or flicker. This
is normal and does not indicate a malfunction.

What should I do if no image is displayed on my TV screen or external display connected
to the HDMI port?

❑

The

HDMI

port is disabled when your computer is in STAMINA mode. Change the performance mode to SPEED mode

before connecting an external device to the

HDMI

port. See

Selecting Performance Modes

(page 109)

for mode

selection.

❑

Make sure you are using an HDCP-compliant display. The copyright protected contents are not displayed on a non-HDCP
compliant display. See

Connecting a Computer Display

(page 85)

for more information.

Summary of Contents for VAIO VGN-Z690P




































































































































































































































Search results

Summary of Contents for VAIO VGN-Z690P

Reviews:

Related manuals for VAIO VGN-Z690P

Brands by name

Popular brands

Sony VAIO VGN-Z690P, User Manual

Search results

Summary of Contents for VAIO VGN-Z690P

Reviews:

Related manuals for VAIO VGN-Z690P

Brands by name

Popular brands