manualshive.com logo in svg

Sony VAIO VGN-Z500 Series, User Manual

Share
Download
Sony VAIO VGN-Z500 Series User Manual Download Page 238

238

n

N

Trademarks

SDHC Logo is a trademark.

The ExpressCard word mark and logos are owned by the PCMCIA and any use of such marks by Sony Corporation is under 
license.

MultiMediaCard is a trademark of MultiMediaCard Association.

HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing 
LLC.

ENERGY STAR and the ENERGY STAR mark are registered U.S. marks.

All other names of systems, products, and services are trademarks of their respective owners. In the manual, the ™ or ® 
marks may not be specified.

Features and specifications are subject to change without notice. All other trademarks are trademarks of their respective 
owners.

See the online specifications to see what software is available for your model.

Summary of Contents for VAIO VGN-Z500 Series
















































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands