Sony Vaio VGN-Z Series User Manual Download

Page: 84 / 218

Using Peripheral Devices

Connecting an External Display

You can connect an external display (not supplied) to your computer. For example, you can use the computer with a computer
display or a projector.

The screen resolution of your external display may change when you switch between the performance modes.

✍

Connect the power cord of your external display after connecting all other cables.

Connecting a Computer Display

You can connect a computer display (monitor) either directly to your computer or via the optional docking station.

To connect a computer display

The monitor port on your computer is disabled when the computer is attached to the docking station or an external display is connected to the

HDMI

port.

The

HDMI

port on your computer and the

DVI-D

port on the docking station are available only when your computer is in SPEED mode.

If you connect an HDMI cable to the

HDMI

port on your computer or a display cable to the

DVI-D

port on the docking station when your computer is

in STAMINA mode, a confirmation window appears. Follow the on-screen instructions to change the performance mode to SPEED mode.

If necessary, plug one end of the display's power cord (1) into your display, and the other end into an AC outlet.

If you want to connect an analog monitor, plug the display cable (2) (not supplied) into the monitor port (3)

on the

computer or on the docking station.

If you want to connect a TFT/DVI monitor, use an HDMI cable (not supplied) and an HDMI to DVI-D adapter (not supplied)
to connect the TFT/DVI monitor to the

HDMI

port on the computer, or plug the display cable (not supplied) into the

DVI-

port on the docking station.

Summary of Contents for Vaio VGN-Z Series



























































































































































































































Search results

Summary of Contents for Vaio VGN-Z Series

Reviews:

Related manuals for Vaio VGN-Z Series

Brands by name

Popular brands

Sony Vaio VGN-Z Series, User Manual

Search results

Summary of Contents for Vaio VGN-Z Series

Reviews:

Related manuals for Vaio VGN-Z Series

Brands by name

Popular brands