Sony VAIO VGN-UX100 Series User Manual Download

Page: 72 / 189

Using Peripheral Devices

Connecting an External Display

You can connect an external display to your computer. For example, you can use the computer with a computer display or a
projector.

✍

Connect the power cord after connecting all other cables.

Connected external displays are used as second screens.

On Windows systems only, you can also use an external display to set up multiple monitors.

Connecting a Computer Display

You need the supplied port replicator or display/LAN adapter to connect a computer display to your computer.

To connect a computer display

If necessary, plug one end of the display's power cord (1) into the display, and the other end into an AC outlet.

Plug the display cable (2) (not supplied) into the monitor (VGA) port (3)

on the port replicator or on the display/LAN

adapter.

Summary of Contents for VAIO VGN-UX100 Series






























































































































































































Search results

Summary of Contents for VAIO VGN-UX100 Series

Reviews:

Related manuals for VAIO VGN-UX100 Series

Brands by name

Popular brands

Sony VAIO VGN-UX100 Series, User Manual

Search results

Summary of Contents for VAIO VGN-UX100 Series

Reviews:

Related manuals for VAIO VGN-UX100 Series

Brands by name

Popular brands