Sony VAIO VGN-TT Series User Manual Download Page 97

Page: 97 / 224

Using Peripheral Devices

Connecting a Computer Display

You can connect a computer display (monitor) either directly to your computer or via the optional docking station.

To connect a computer display

The monitor port on your computer is not accessible when the computer is attached to the docking station. Use the

MONITOR

port on the docking

station for connecting a computer display.

If necessary, plug one end of the display's power cord (1) into your display, and the other end into an AC outlet.

If you want to connect an analog monitor, plug the display cable (2) (not supplied) into the monitor port (3)

on the

computer or on the docking station.

Summary of Contents for VAIO VGN-TT Series

































































































































































































































Search results

Summary of Contents for VAIO VGN-TT Series

Reviews:

Related manuals for VAIO VGN-TT Series

Brands by name

Popular brands

Sony VAIO VGN-TT Series, User Manual

Search results

Summary of Contents for VAIO VGN-TT Series

Reviews:

Related manuals for VAIO VGN-TT Series

Brands by name

Popular brands