Sony VAIO VGN-TT Series User Manual Download Page 84

Page: 84 / 224

Using Peripheral Devices

Connecting the Noise Canceling Headphones

To connect the noise canceling headphones

Plug the headphones cable into the headphones jack

The

icon appears on the taskbar to indicate that the noise canceling function is enabled and a balloon message

pops up from the icon.

Before plugging the headphones cable to the headphones jack, make sure that the embossed marking on the plug faces upward.

✍

When the

icon is on the taskbar, the noise canceling function is disabled. Right-click the icon and select

Enable Noise Canceling Function

from

the menu.

If no icon is on the taskbar, see

What to do if the icon and the balloon do not appear

(page 86)

to change the settings.

Summary of Contents for VAIO VGN-TT Series

































































































































































































































Search results

Summary of Contents for VAIO VGN-TT Series

Reviews:

Related manuals for VAIO VGN-TT Series

Brands by name

Popular brands

Sony VAIO VGN-TT Series, User Manual

Search results

Summary of Contents for VAIO VGN-TT Series

Reviews:

Related manuals for VAIO VGN-TT Series

Brands by name

Popular brands