Sony VAIO VGN-TT Series User Manual Download Page 51

Page: 51 / 224

Using Your VAIO Computer

Inserting an ExpressCard Module

Your computer is supplied with a slot protector in the ExpressCard slot. Remove the slot protector before you use the slot.

Use care when inserting or removing the ExpressCard module from the slot. Do not force it in or out of the slot.

✍

You do not need to shut down your computer before inserting or removing the ExpressCard module.

To insert an ExpressCard module

Locate the ExpressCard slot.

Push the ExpressCard slot protector so that the protector pops out.

Gently take hold of the ExpressCard slot protector and pull it out of the slot.

Hold the ExpressCard module with the arrow facing upward and pointing toward the slot.

Carefully slide the ExpressCard module into the slot until it clicks into place.
Do not force it into the slot.

Summary of Contents for VAIO VGN-TT Series

































































































































































































































Search results

Summary of Contents for VAIO VGN-TT Series

Reviews:

Related manuals for VAIO VGN-TT Series

Brands by name

Popular brands

Sony VAIO VGN-TT Series, User Manual

Search results

Summary of Contents for VAIO VGN-TT Series

Reviews:

Related manuals for VAIO VGN-TT Series

Brands by name

Popular brands