Sony VAIO VGN-TT Series User Manual Download Page 179

Page: 179 / 224

179

Troubleshooting

What should I do if my game software does not work or it keeps crashing?

❑

Check the web site of the game if there are any patches or updates to download.

❑

Make sure you have installed the latest video driver.

❑

On some VAIO models, the graphics memory is shared with the system. The optimal graphic performance in this case is
not guaranteed.

What should I do if I cannot remember the power-on password?

If you have forgotten the power-on password, contact VAIO-Link to reset it. A reset fee will be charged.

How can I change the boot device order?

You can use one of the BIOS functions to change the boot device order. Follow these steps:

Turn on your computer.

Press the

key when the VAIO logo appears.

The BIOS setup screen appears. If not, restart the computer and press the

key several times when the VAIO logo

appears.

Press the

key to select

Boot

Press the

key to select the drive whose boot device order you want to change.

Press the

key to change the boot device order.

Press the

key to select

Exit

, select

Exit Setup

, and then press the

Enter

key.

At the confirmation prompt, press the

Enter

key.

Summary of Contents for VAIO VGN-TT Series

































































































































































































































Search results

Summary of Contents for VAIO VGN-TT Series

Reviews:

Related manuals for VAIO VGN-TT Series

Brands by name

Popular brands

Sony VAIO VGN-TT Series, User Manual

Search results

Summary of Contents for VAIO VGN-TT Series

Reviews:

Related manuals for VAIO VGN-TT Series

Brands by name

Popular brands