Home
/
Sony
/
VAIO VGN-SZ640NA
/
User Manual

Sony VAIO VGN-SZ640NA, User Manual, Page: 200 / 225

Share

Page: 200 / 225

Sony VAIO VGN-SZ640NA User Manual Download Page 200

200

Troubleshooting

What should I do if I do not hear sound from the built-in speakers?

❑

If you are using a program that has its own volume control, make sure the volume control is properly set. See the
program's help file for more information.

❑

Make sure the speaker volume is turned up loud enough and the audio option is enabled.

❑

The volume may have been turned off by the Fn+F2 keys. Press them once again.

❑

The volume may have been minimized by the Fn+F3 keys. Press the Fn+F4 keys to turn up the volume loud enough to
hear sound.

❑

Check the Windows volume controls by clicking the volume icon on the taskbar.

❑

If Audio/Modem is disabled on VAIO Power Management power scheme settings, enable the option. See Activating
VAIO Power Management Power Schemes

for the procedure.

«
...
198
199
200
201
202
...
»

Summary of Contents for VAIO VGN-SZ640NA


































































































































































































































Reviews:

No comments