Sony VAIO VGN-SZ600 Series User Manual Download Page 131

Page: 131 / 216

Customizing Your VAIO Computer

To return to Normal mode

Press any key.

If you press and hold the power button for more than four seconds, your computer will turn off automatically. You will lose all unsaved data.

✍

You can use

VAIO Central

to configure your computer to return to Normal mode when you open the LCD screen lid. This power resuming preference

will be lost if you remove both the AC adapter and the battery pack. See

Setting Up Your Computer with VAIO Central

(page 127)

If the computer is not used for a certain period of time, it will enter Standby mode. To modify this, you can change the Standby
mode settings.

To change the Standby mode settings

Click

Start

and then

Control Panel

Click

Performance and Maintenance

Click

Power Options

The

Power Options Properties

window appears.

Select the

Power Schemes

tab.

Change the

System Standby

settings.

Summary of Contents for VAIO VGN-SZ600 Series

























































































































































































































Search results

Summary of Contents for VAIO VGN-SZ600 Series

Reviews:

Brands by name

Popular brands

Sony VAIO VGN-SZ600 Series, User Manual

Search results

Summary of Contents for VAIO VGN-SZ600 Series

Reviews:

Brands by name

Popular brands