184
Troubleshooting
Why can't I use the built-in MOTION EYE camera?
❑
The built-in MOTION EYE camera cannot be shared by more than one software application. If another software
application is using the camera, exit the application before using the built-in MOTION EYE camera.
❑
If the problem persists, you must reinstall the driver software for the camera. Follow these steps:
1
Click Start and then Control Panel.
2
Click the Performance and Maintenance icon.
3
Click the System icon.
4
Click Device Manager on the Hardware tab.
5
Double-click Imaging devices.
6
Right-click Sony Visual Communication Camera VGP-VCC2 and click Update Driver.
What should I do if my computer becomes unstable when it enters Standby or Hibernate
mode while the built-in MOTION EYE camera is in use?
❑
Do not place your computer into Standby or Hibernate mode while you are using the built-in MOTION EYE camera.
❑
If your computer automatically enters Standby or Hibernate mode, change the respective power saving mode setting. For
changing the setting, see Using the Power Saving Modes
.