background image

165

n

N

Precautions

On Using Headphones

Road safety – Do not use headphones while driving, cycling, or operating any motorized vehicle. It may create a traffic 
hazard and is illegal in some areas. It can also be potentially dangerous to play loud music while walking, especially at 
pedestrian crossings. 

Preventing hearing damage – Avoid using headphones at high volume. Hearing experts advise against continuous, loud 
and extended play. If you experience a ringing in your ears, reduce the volume or discontinue use.

 

On Handling Memory Stick Media

Do not use the media in locations that are subject to static electricity or electrical noise.

Do not touch the Memory Stick media connector with your finger or metallic objects.

Use only the adhesive label supplied with the Memory Stick media as a label.

Do not bend, drop, or apply strong shock to the Memory Stick media.

Do not disassemble or modify Memory Stick media.

Do not let Memory Stick media get wet.

Do not use or store Memory Stick media in a location subject to:

Extremely high temperatures, such as in a car parked in the sun

Direct sunlight

High humidity

Corrosive substances

Use the storage case supplied with the Memory Stick media.

 

Summary of Contents for VAIO VGN-SZ2M



























































































































































































































Reviews: