Troubleshooting
Why is the video input from the built-in MOTION EYE camera suspended for a few
seconds?
The video input may be suspended for a few seconds if:
❑
a shortcut key with the
Fn
key is used.
❑
the CPU load increases.
This is normal and does not indicate a malfunction.
What should I do if my computer becomes unstable when it enters a power saving mode
while the built-in MOTION EYE camera is in use?
❑
Do not place your computer into Sleep or Hibernate mode while you are using the built-in
MOTION EYE
camera.
❑
If your computer automatically enters Sleep or Hibernate mode, change the corresponding power saving mode setting.
To change the setting, see
Using the Power Saving Modes