Sony Vaio VGN-S1HP Hardware Manual Download

Page: 65 / 109

Using your VAIO computer

✍

If you have a mobile CPU (see the printed

Specifications

sheet), a CPU control icon may appear in the taskbar. The CPU control icon indicates the CPU control status

(Performance, Adaptive, Battery Life, Degrade). To make the icon appear, click the

Advanced

button on the

VAIO Power Management

tab. Select the

Show CPU status

icon in the taskbar

box and then click

If you want to know more about the CPU control icon, read the online help file (

Other Information - Icons on the Notification Area

Restoring the default settings

The power scheme settings that you changed on the

VAIO Power Management

tab can be restored to the default settings.

To restore the default settings, proceed as follows:

Select the

VAIO Power Management

tab in the

Power Options Properties

window.

Click the

Advanced

button.

The

VAIO Power Management

window appears.

Click the

Reset by default

button.

The

Confirm

window appears.

Select the

Restore all power schemes to the original factory default settings

Click

The

Confirm

window closes and the default settings are restored for all the power scheme options.

Summary of Contents for Vaio VGN-S1HP














































































































Search results

Summary of Contents for Vaio VGN-S1HP

Reviews:

Related manuals for Vaio VGN-S1HP

Brands by name

Popular brands

Sony Vaio VGN-S1HP, Hardware Manual

Search results

Summary of Contents for Vaio VGN-S1HP

Reviews:

Related manuals for Vaio VGN-S1HP

Brands by name

Popular brands