Sony VAIO VGN-P530H User Manual Download

Page: 81 / 138

Customizing Your VAIO Computer >
Using the Power Saving Modes

To return to Normal mode

❑

Press any key.

❑

Slide the power switch (in the direction of

on the switch).

If you slide (in the direction of

on the switch) and hold the power switch for more than four seconds, your computer will turn off automatically. You

will lose all unsaved data.

✍

You can use the

VAIO Control Center

to configure your computer to return to Normal mode when you open the LCD screen lid. This power resuming

preference will be lost if you remove both the AC adapter and the battery pack. See

Using the VAIO Control Center

(page 78)

If the computer is not used for a certain period of time, it will enter Standby mode. To modify this, you can change the Standby
mode settings.

To change the Standby mode settings

Click

Start

and then

Control Panel

Click

Performance and Maintenance

Click

Power Options

The

Power Options Properties

window appears.

Select the

Power Schemes

tab.

Change the

System Standby

settings.

Summary of Contents for VAIO VGN-P530H











































































































































Search results

Summary of Contents for VAIO VGN-P530H

Reviews:

Related manuals for VAIO VGN-P530H

Brands by name

Popular brands

Sony VAIO VGN-P530H, User Manual

Search results

Summary of Contents for VAIO VGN-P530H

Reviews:

Related manuals for VAIO VGN-P530H

Brands by name

Popular brands