Sony VAIO VGN-P Series Operating Instructions - Hardware Manual Download

Page: 23 / 155

Getting Started >
Using the Battery Pack

Removing the Battery Pack

You may lose data if you remove the battery pack while your computer is on and not connected to the AC adapter or if you remove the battery pack
while the computer is in Sleep mode.

To remove the battery pack

Turn off the computer and close the LCD screen lid.

Slide the battery

LOCK

switch (1) inward.

Slide and hold the battery

RELEASE

latch (2) inward and slightly slide the battery pack toward the back of the computer.

Lift the back edge of the battery pack to take it out of the battery compartment.

Summary of Contents for VAIO VGN-P Series




























































































































































Search results

Summary of Contents for VAIO VGN-P Series

Reviews:

Related manuals for VAIO VGN-P Series

Brands by name

Popular brands

Sony VAIO VGN-P Series, Operating Instructions - Hardware Manual

Search results

Summary of Contents for VAIO VGN-P Series

Reviews:

Related manuals for VAIO VGN-P Series

Brands by name

Popular brands