background image

112

n

N

Precautions

Handling the Memory Stick

Do not touch the Memory Stick connector with your finger or metallic objects.

Use only the adhesive label supplied with the Memory Stick as a label.

Do not bend, drop, or expose the Memory Stick.

Do not disassemble or modify the Memory Stick.

Do not let the Memory Stick get wet.

Do not use or store the Memory Stick in a location subject to:

Static electricity

Electrical noise

Extremely high temperatures, such as in a car parked in the sun

Direct sunlight

High humidity

Corrosive substances

Use the storage case supplied with the Memory Stick.

Be sure to make a backup copy of your valuable data.

Keep the Memory Stick and the Memory Stick adaptors out of reach of children. There is a risk of swallowing them.

When using the Memory Stick Duo, do not use a fine-tipped pen to write on the label adhered to the Memory Stick Duo. 
Exerting pressure on the media may damage internal components.

 

Summary of Contents for VAIO VGN-NS100 Series












































































































































































Reviews: