Sony VAIO VGN-N Series User Manual Download Page 97

Page: 97 / 154

Upgrading Your VAIO Computer

Upgrading Your VAIO Computer

Your computer and memory modules use high precision components and electronic connectors technology. To avoid the
invalidation of your guarantee due to mishandling, we recommend that:

❑

You contact your dealer to install a new memory module.

❑

You do not install it yourself, if you are not familiar with upgrading memory on a computer.

❑

You do not touch the connectors or open the memory module compartment cover.

For the type of module and the amount of memory installed on your model, refer to the online Specifications.

Contact VAIO-Link if you need assistance.

Summary of Contents for VAIO VGN-N Series



























































































































































Search results

Summary of Contents for VAIO VGN-N Series

Reviews:

Related manuals for VAIO VGN-N Series

Brands by name

Popular brands

Sony VAIO VGN-N Series, User Manual

Search results

Summary of Contents for VAIO VGN-N Series

Reviews:

Related manuals for VAIO VGN-N Series

Brands by name

Popular brands