149
Troubleshooting
6
Press the
M
or
m
key to select your desired priority under
Boot Priority
and press the
Enter
key.
7
Press the
M
or
m
key to select the device to which you want to assign the priority and press the
Enter
key.
Except IRX-4590_END
8
Press the
<
or
,
key to select
Exit
, select
Exit Setup
, and then press the
Enter
key.
At the confirmation prompt, press the
Enter
key.
Why doesn't my screen turn off after the automatic turn-off time has passed?
The VAIO original screen saver disables the timer setting, which you can select using the Windows power options, for your
screen to turn off.
Select a screen saver other than the VAIO original screen saver.
What should I do if I cannot boot my computer from the USB floppy disk drive connected
to the computer?
To boot your computer from the USB floppy disk drive, you need to change the boot device.
Turn on your computer and press the
F11
key when the VAIO logo appears.
US model_BGN
How do I reduce the volume of the recovery partition?
Your built-in storage device* contains the recovery partition where data for the system recovery is stored. If your computer
includes a built-in flash memory storage drive, you might want to reduce the volume of the recovery partition by following
these steps:
Except GVD model_BGN
*
See the online specifications to find out about your storage device configuration.
Summary of Contents for VAIO VGN-GS Series
Page 1: ...N User GuideHardware GuideOperating Instructions Hardware GuideUser Guide ...
Page 120: ...120 n N Customizing Your VAIO Computer Except US model_END ...
Page 141: ...141 n N Precautions Your computer must be connected to the Internet to download the updates ...
Page 195: ... 2009 Sony Corporation n ...
