116
Customizing Your VAIO Computer
❑
LAN Device
(Ethernet port)
!
You computer may not include some of the above built-in devices, depending on the model you purchased.
To disable built-in devices
1
Turn on the computer.
2
Press the
F2
key when the VAIO logo appears.
The BIOS setup screen appears. If not, restart the computer and press the
F2
key several times when the VAIO logo
appears.
3
Press the
<
or
,
key to select
Advanced
.
4
Press the
M
or
m
key to select your desired built-in device, and press the
Enter
key.
5
Press the
M
or
m
key to select
Disabled
and press the
Enter
key.
✍
To enable the device, select
Enabled
instead of
Disabled
.
6
If you want to disable more built-in devices, repeat steps 4 and 5 for each device.
7
Press the
<
or
,
key to select
Exit
, select
Exit Setup
, and then press the
Enter
key.
At the confirmation prompt, press the
Enter
key.
Restricting USB Access
Your computer has the
USB Access Restriction Setting
utility installed for protecting your data from unauthorized use. With
this software, you can put restrictions on the use of USB ports.
To start this software, you need to log onto your computer as a user with administrator rights.
To use the USB Access Restriction Setting utility
1
Click
Start
,
All Programs
, and
VAIO Control Center
.
Summary of Contents for VAIO VGN-GS Series
Page 1: ...N User GuideHardware GuideOperating Instructions Hardware GuideUser Guide ...
Page 120: ...120 n N Customizing Your VAIO Computer Except US model_END ...
Page 141: ...141 n N Precautions Your computer must be connected to the Internet to download the updates ...
Page 195: ... 2009 Sony Corporation n ...
