Sony VAIO VGN-FW390YMH User Manual Download Page 48

Page: 48 / 179

Using Your VAIO Computer

Inserting an ExpressCard Module

Use care when inserting or removing the ExpressCard module from the slot. Do not force it in or out of the slot.

✍

You do not need to shut down your computer before inserting or removing the ExpressCard module.

To insert an ExpressCard module

Locate the ExpressCard slot.

Carefully slide the ExpressCard module into the slot until it clicks into place.
Do not force it into the slot.

✍

If the module does not go into the slot easily, remove it gently and verify you are inserting it in the proper direction.

Make sure you use the most recent software driver provided by the ExpressCard module manufacturer.

Summary of Contents for VAIO VGN-FW390YMH




















































































































































































Search results

Summary of Contents for VAIO VGN-FW390YMH

Reviews:

Related manuals for VAIO VGN-FW390YMH

Brands by name

Popular brands

Sony VAIO VGN-FW390YMH, User Manual

Search results

Summary of Contents for VAIO VGN-FW390YMH

Reviews:

Related manuals for VAIO VGN-FW390YMH

Brands by name

Popular brands