background image

57

n

N

Using Your VAIO Computer

Using the Internet

Setting Up a Dial-up Internet Connection

Before you can connect to the Internet, you need to connect your computer to a telephone line with a telephone cable (not 
supplied) and have an account with an Internet Service Provider (ISP).

To connect a telephone cable

1

Plug one end of the phone cable (1) into the modem port 

 on the computer.

2

Plug the other end into the wall jack (2).

Your computer does not work with party lines, cannot be connected to a coin-operated telephone, and may not work with multiple telephone lines or a 
private branch exchange (PBX). Some of these connections may result in excess electrical current and could cause a malfunction in the internal modem.

If you connect a telephone cable coming through a splitter, the modem or connected device may not work properly.

To set up a dial-up connection to the Internet

1

Click 

Start

 and 

Control Panel

.

2

Click

 Connect to the Internet

 under 

Network and Internet

.

The 

Connect to the Internet

 window appears.

3

Click 

Dial-up

.

4

Follow the on-screen instructions.

Summary of Contents for VAIO VGN-FW280J



























































































































































































Reviews: