Sony VAIO VGN-FW235DH User Manual Download Page 114

Page: 114 / 183

Upgrading Your VAIO Computer

Remove the new memory module from its packaging.

Slide the memory module into the memory module slot and push it in until it clicks into place.

Do not touch any other components on the motherboard.

Be sure to insert the connector edge of the memory module into the slot while aligning the notch on the module with the small projection in the open

slot. Do not force the memory module into the slot in a wrong orientation, as it may cause damage to the slot and the module.

Replace the memory module compartment cover.

Tighten the screw on the bottom of the computer.

Reinstall the battery pack and turn on the computer.

Summary of Contents for VAIO VGN-FW235DH
























































































































































































Search results

Summary of Contents for VAIO VGN-FW235DH

Reviews:

Related manuals for VAIO VGN-FW235DH

Brands by name

Popular brands

Sony VAIO VGN-FW235DH, User Manual

Search results

Summary of Contents for VAIO VGN-FW235DH

Reviews:

Related manuals for VAIO VGN-FW235DH

Brands by name

Popular brands