Sony VAIO VGN-FW130 User Manual Download

Page: 33 / 195

Using Your VAIO Computer

Using Special-function Buttons

Your computer is equipped with special buttons to help you use specific functions of the computer.

Special-function button

Functions

button

By default, the

button launches

Dolby Control Center

✍

The default button assignment may be different from the above. In such a case, you can change the assignment in the
window for changing the

button assignment. To display this window, press and hold the button or launch and navigate

through

VAIO Control Center

. See the help file on

VAIO Control Center

for the

button assignment.

VOL-

VOL+

buttons

Decrease (-) and increase (+) the volume.

Play/Pause button

Starts or pauses playback of a CD, DVD, or Blu-ray Disc

™*

media or a music/video file stored on the hard disk

drive.

Stop button

Stops playback of a CD, DVD, or Blu-ray Disc

media or a music/video file stored on the hard disk drive.

Previous track button

Plays the previous chapter/file during video playback or the previous song/file during audio playback.

Next track button

Plays the next chapter/file during video playback or the next song/file during audio playback.

AV MODE

button

Launches

VAIO Launcher

for selecting the desired software.

You can change the default software options in

VAIO Launcher

. To do so, press and hold the

AV MODE

button to display the setup window.

On models with a

Blu-ray Disc drive only.

Use the

WinDVD BD

software for playback.

Summary of Contents for VAIO VGN-FW130




































































































































































































Search results

Summary of Contents for VAIO VGN-FW130

Reviews:

Related manuals for VAIO VGN-FW130

Brands by name

Popular brands

Sony VAIO VGN-FW130, User Manual

Search results

Summary of Contents for VAIO VGN-FW130

Reviews:

Related manuals for VAIO VGN-FW130

Brands by name

Popular brands