background image

100

n

N

Troubleshooting

Computer

What should I do if my computer won't start?

Make sure the computer is securely plugged into a power source and turned on. Make sure the power indicator shows 
the power is on.

Make sure the battery is installed properly and charged.

Make sure the floppy disk drive (if applicable) is empty.

If the computer is plugged into a power strip or uninterruptible power supply (UPS), make sure the power strip or UPS is 
plugged into a power source and turned on.

If you are using an external display, make sure it is plugged into a power source and turned on. Make sure the brightness 
and contrast controls are adjusted correctly. See the manual that came with your display for details.

Disconnect the AC adapter and remove the battery. Wait three to five minutes. Reattach the AC adapter and reinstall the 
battery, and press the power button to turn on the computer.

Condensation may cause the computer to malfunction. If this occurs, do not use the computer for at least one hour.

Remove any extra memory modules you may have inserted since purchase.

Check that you are using the supplied Sony AC adapter. For your safety, use only genuine Sony rechargeable battery 
packs and AC adapters, which are supplied by Sony for your VAIO computer.

 

Summary of Contents for VAIO VGN-FS920






















































































































































Reviews: