Sony VAIO VGN-FS415M User Manual Download

Page: 107 / 169

107

Customizing Your VAIO Computer

Installing Software

To install bundled software from the supplied Recovery Disc or your hard disk drive, see the printed Recovery Guide for details.
For software bundled with accessories, check first the installation procedure that comes with the accessory.

To install other software, use the following procedure.

Before installing the applications:

❑

Install and connect a hardware device, if necessary (see the Managing Drivers

(page 111)

section);

❑

Close all open applications.

To install an application

Click Start and then Control Panel.

Click Add or Remove Programs.

Click Add New Programs, and then click CD or Floppy.
The Install Program From Floppy Disk or CD-ROM window appears.

Insert the first installation floppy disk or CD-ROM and click Next.
The Run Installation Program appears.

For the rest of the procedure, follow the on-screen instructions.

✍

When using Add or Remove Programs, you can only install programs that were written for Windows operating systems.

Summary of Contents for VAIO VGN-FS415M










































































































































































Search results

Summary of Contents for VAIO VGN-FS415M

Reviews:

Related manuals for VAIO VGN-FS415M

Brands by name

Popular brands

Sony VAIO VGN-FS415M, User Manual

Search results

Summary of Contents for VAIO VGN-FS415M

Reviews:

Related manuals for VAIO VGN-FS415M

Brands by name

Popular brands