Sony VAIO VGN-FJ340FP Page 32 User Manual Download

Page: 32 / 167

Using Your VAIO Computer

Using the Optical Disc Drive

Your computer is equipped with an optical disc drive.

To insert a disc

Turn on the computer.

Press the drive eject button (1) to open the drive.
The tray slides out.

Place a disc in the middle of the tray with the label side facing up and gently push it until the disc clicks into place.

Close the tray by pushing it in gently.

Do not remove the optical disc when the computer is in a power saving mode (Standby or Hibernate). Doing so may cause the computer to malfunction.

✍

If you plan to use an external optical disc drive, connect the drive before you launch any preinstalled CD/DVD program.

Summary of Contents for VAIO VGN-FJ340FP








































































































































































Search results

Summary of Contents for VAIO VGN-FJ340FP

Reviews:

Related manuals for VAIO VGN-FJ340FP

Brands by name

Popular brands

Sony VAIO VGN-FJ340FP, User Manual

Search results

Summary of Contents for VAIO VGN-FJ340FP

Reviews:

Related manuals for VAIO VGN-FJ340FP

Brands by name

Popular brands