Sony VAIO VGN-FJ1SR User Manual Download

Page: 134 / 140

134

Troubleshooting

I cannot use the built-in MOTION EYE camera

❑

The built-in MOTION EYE camera cannot be shared by more than one software application. If another software
application is using the camera, exit the application before using the built-in MOTION EYE camera.

❑

If the problem persists, you must reinstall the driver software for the camera. Proceed as follows to reinstall the driver
software.

Click Start and then Control Panel.

Click the Performance and Maintenance icon.

Click the System icon.

Click Device Manager on the Hardware tab.

Double-click Imaging devices.

Right-click Sony Visual Communication Camera VGP-VCC1 and click Update Driver.

Summary of Contents for VAIO VGN-FJ1SR













































































































































Search results

Summary of Contents for VAIO VGN-FJ1SR

Reviews:

Related manuals for VAIO VGN-FJ1SR

Brands by name

Popular brands

Sony VAIO VGN-FJ1SR, User Manual

Search results

Summary of Contents for VAIO VGN-FJ1SR

Reviews:

Related manuals for VAIO VGN-FJ1SR

Brands by name

Popular brands