Sony VAIO VGN-C270CNH Page 52 User Manual Download

Page: 52 / 179

Using Your VAIO Computer

Removing a Memory Stick Media

To remove a Memory Stick media

Check that the Memory Stick PRO/Duo media indicator is off.

Push the Memory Stick media in toward the computer.
The Memory Stick media ejects.

Pull the Memory Stick media out of the slot.

Always remove the Memory Stick media gently, or it may pop out unexpectedly.

Do not remove the Memory Stick media while the Memory Stick PRO/Duo media indicator is turned on. If you do, you may lose data. Large volumes

of data may take time to load, so be sure the indicator is off before removing the Memory Stick media.

Summary of Contents for VAIO VGN-C270CNH




















































































































































































Search results

Summary of Contents for VAIO VGN-C270CNH

Reviews:

Related manuals for VAIO VGN-C270CNH

Brands by name

Popular brands

Sony VAIO VGN-C270CNH, User Manual

Search results

Summary of Contents for VAIO VGN-C270CNH

Reviews:

Related manuals for VAIO VGN-C270CNH

Brands by name

Popular brands