Sony VAIO VGN-BZ560N User Manual Download

Page: 47 / 228

Using Your VAIO Computer

Using PC Cards

PC Cards allow you to connect portable external devices to your computer.

You cannot use PC Cards if you disable the PC Card slot in the BIOS setup screen. To enable the slot, follow the steps and the tip in

Disabling Built-in

Devices

(page 137)

Inserting a PC Card

Some PC Cards or their functions may not be compatible with your computer.

✍

You do not need to shut down your computer before inserting or removing a PC Card.

To insert a PC Card

Insert the PC Card into the PC Card slot with the front label facing upward.

Gently push the PC Card into the slot all the way to the end.
The PC Card is automatically detected by your system.
The

Safely Remove Hardware

icon appears on the taskbar.

Summary of Contents for VAIO VGN-BZ560N





































































































































































































































Search results

Summary of Contents for VAIO VGN-BZ560N

Reviews:

Related manuals for VAIO VGN-BZ560N

Brands by name

Popular brands

Sony VAIO VGN-BZ560N, User Manual

Search results

Summary of Contents for VAIO VGN-BZ560N

Reviews:

Related manuals for VAIO VGN-BZ560N

Brands by name

Popular brands