Sony VAIO VGN-BX396XP User Manual Download Page 202

Page: 202 / 228

202

Troubleshooting

CDs and DVDs

Why does my computer freeze when I try to read a disc?

The disc that your computer is trying to read may be dirty or damaged. Follow these steps:

Restart the computer by clicking Start, Turn Off Computer, and Restart.

Eject the disc from the optical disc drive.

Examine the disc for dirt or damage. If the disc is dirty, see On Handling Discs

(page 173)

for instructions on how to

clean it.

What should I do if the drive tray does not open?

❑

Make sure your computer is on.

❑

Press the drive eject button.

❑

If the drive eject button does not work, click Start and then My Computer. Right-click the optical disc drive icon, and select
Eject from the shortcut menu.

❑

If none of the above options work, insert a thin, straight object (such as a paper clip) in the manual eject hole near the
drive eject button.

❑

Try restarting your computer.

Summary of Contents for VAIO VGN-BX396XP





































































































































































































































Search results

Summary of Contents for VAIO VGN-BX396XP

Reviews:

Brands by name

Popular brands

Sony VAIO VGN-BX396XP, User Manual

Search results

Summary of Contents for VAIO VGN-BX396XP

Reviews:

Brands by name

Popular brands