background image

70

n

N

Using Your VAIO Computer

!

Your computer has been tested and found compatible with Sony branded Memory Stick media with capacity of up to 8 GB that are available as of 
September 2007. However, not all Memory Stick media that meet the same specifications as the compatible media are guaranteed of compatibility.

Inserting a Memory Stick media with multiple conversion adapters is not guaranteed of compatibility.

MagicGate is the general name of the copyright protection technology developed by Sony. Use a Memory Stick media with the MagicGate logo to use 

this feature.

Except for your personal use, it is against the copyright law to use any audio and/or image data you recorded without prior consent from the respective 
copyright holders. Accordingly, Memory Stick media with such copyrighted data can be used only within the law.

The Memory Stick slot on your computer does not support 8-bit parallel data transfer (high speed data transfer).

The Memory Stick Micro media in an M2 Duo-size Adaptor may not operate properly if it is additionally inserted into a Memory Stick Duo Adaptor.

 

Summary of Contents for VAIO VGN-AR Series



















































































































































































































Reviews: