Sony VAIO VGC-RT Series User Manual Download

Page: 76 / 192

Using Your VAIO Computer

Inserting a CF Memory Card

Your computer is supplied with a slot protector in the

(CompactFlash) memory card slot. Remove the slot protector before you use the

(CompactFlash) memory card slot.

Use care when inserting or removing the CF memory card from the slot. Do not force it in or out of the slot.

To insert a CF memory card

Locate the

(CompactFlash) memory card slot

(page 20)

Push the

memory card release button so that the release button pops out.

Push the

memory card release button a second time so that the slot protector pops out.

Gently take hold of the slot protector and pull it out of the slot.

Hold the CF memory card with the arrow facing toward you and pointing toward the slot.

Carefully slide the CF memory card into the slot until it clicks into place.
Do not force the card into the slot.

Summary of Contents for VAIO VGC-RT Series

































































































































































































Search results

Summary of Contents for VAIO VGC-RT Series

Reviews:

Related manuals for VAIO VGC-RT Series

Brands by name

Popular brands

Sony VAIO VGC-RT Series, User Manual

Search results

Summary of Contents for VAIO VGC-RT Series

Reviews:

Related manuals for VAIO VGC-RT Series

Brands by name

Popular brands