Sony VAIO VGC-RT Series User Manual Download Page 153

Page: 153 / 192

153

Troubleshooting

What should I do if the green power indicator light turns on but my screen remains blank?

❑

If the orange

DISPLAY OFF

indicator is lit, press the

DISPLAY OFF

button.

❑

Make sure the computer input is selected. To change the display input, press the

HDMI SELECT

button on the right of

the computer.

❑

Press the

Alt

keys several times to close the application window. An application error may have been occurred.

❑

Press the

Ctrl

Alt

Delete

keys and click the arrow next to the

Shut down

button and

Restart

❑

Press and hold the power button for more than four seconds to shut down your computer. Unplug the power cord and
leave the computer for about five minutes. Then, plug the power cord and turn on the computer again.

Make sure that the batteries of your wireless keyboard are properly installed and not worn out.

Turning off your computer with the power button or the

Ctrl

Alt

Delete

keys may cause loss of unsaved data.

Summary of Contents for VAIO VGC-RT Series

































































































































































































Search results

Summary of Contents for VAIO VGC-RT Series

Reviews:

Related manuals for VAIO VGC-RT Series

Brands by name

Popular brands

Sony VAIO VGC-RT Series, User Manual

Search results

Summary of Contents for VAIO VGC-RT Series

Reviews:

Related manuals for VAIO VGC-RT Series

Brands by name

Popular brands