background image

127

n

N

Precautions

On Handling the LCD Screen

Do not leave the LCD facing the sun. This could damage the LCD. Be careful when using the computer near a window.

Do not scratch the LCD or exert pressure on it. This could cause a malfunction.

Using the computer in low temperature conditions may produce a residual image on the screen. This is not a malfunction. 
When the computer returns to normal temperature, the screen returns to normal.

A residual image may appear on the screen if the same image is displayed for a lengthy period of time. The residual image 
disappears in a while. You can use a screen saver to prevent residual images.

The screen becomes warm during operation. This is normal and does not indicate a malfunction.

The LCD is manufactured using high-precision technology. You may, however, see tiny black points and/or bright points 
(red, blue, or green) that continuously appear on the LCD. This is a normal result of the manufacturing process and does 
not indicate a malfunction.

Avoid rubbing the LCD screen. This could damage the screen. Use a soft, dry cloth to wipe the LCD screen.

 

Summary of Contents for Vaio VGC-RC210 Series
















































































































































































Reviews: