Sony VAIO VGC-RC110G Series User Manual Download Page 87

Page: 87 / 180

Customizing Your VAIO Computer

Changing/Removing the Power-on Password

To remove the power-on password

Turn on the computer.

Press the F2 key when the VAIO logo appears.

Enter the current password for Enter Current Password:
The BIOS setup screen appears.

Use the

key to select Security on the Boot menu to display another screen.

Use the

key to select the password type that you want to remove and press the Enter key.

At the new password entry prompt, press the Enter key without an entry.

At the confirmation prompt, press the Enter key once again.
The password type you selected in step 5 should now be indicated as Not Installed.

To change the power-on password

Remove the current password and then follow the procedure described in Adding the Power-on Password

(page 86)

add a new password.

Summary of Contents for VAIO VGC-RC110G Series





















































































































































































Search results

Summary of Contents for VAIO VGC-RC110G Series

Reviews:

Related manuals for VAIO VGC-RC110G Series

Brands by name

Popular brands

Sony VAIO VGC-RC110G Series, User Manual

Search results

Summary of Contents for VAIO VGC-RC110G Series

Reviews:

Related manuals for VAIO VGC-RC110G Series

Brands by name

Popular brands