Sony VAIO VGC-RC110G Series, User Manual

Page: 81 / 180

81 n N
Using Peripheral Devices
Connecting an i.LINK Device
Notes on connecting i.LINK devices
❑
The computer includes an i.LINK (IEEE1394) port, which you can use to connect to an i.LINK device such as a digital
video camera recorder or to connect two VAIO computers in order to copy, delete or edit files.
❑
The computer is equipped with a 4-pin and a 6-pin i.LINK port. A 4-pin i.LINK port cannot supply power to a connected
i.LINK device. A 6-pin i.LINK port can supply power (10V to 12V) to a connected i.LINK device, if the device is equipped
with a 6-pin connector. The total power supplied by the 6-pin i.LINK port does not exceed 6 watts.
❑
The i.LINK port supports transfer rates up to 400 Mbps; however, the actual transfer rate depends on the transfer rate of
the external device.
❑
i.LINK cables compatible with the computer include cables with the following part numbers:
VMC-IL4415 (a 1.5 meter cable with a 4-pin connector at each end), VMC-IL4408 Series (a 0.8 meter cable with a 4-pin
connector at each end).
❑
The optional i.LINK cables may not be available, depending on the country or area of your residency.
❑
An i.LINK connection with other compatible devices is not fully guaranteed.
❑
The i.LINK connection varies depending on the software applications, operating system and i.LINK compatible devices
you use. Refer to the manual that came with your software for more information.
❑
Check the working conditions and OS compatibility of i.LINK-compatible PC peripherals (for example, an HDD or CD-RW
drive) before you connect them to the computer.