background image

69

n

N

Using Your VAIO Computer

Using Other Memory Cards

In addition to the Memory Stick media slot, your computer is equipped with three other memory card slots to accommodate 
many popular types of memory cards. You can use these slots to transfer data between digital cameras, camcorders, music 
players, and other audio/video devices.

The memory card slots are located behind a protective cover on the front of the computer. You need to open the cover before 
accessing the memory card slots.

Before You Use Memory Cards

Your computer supports the following memory cards:

CompactFlash

Multi Media Card (MMC)

Microdrive

SmartMedia

xD-PictureCards

Secure Digital (SD)

For the latest information on compatible memory cards, visit the Sony online support Web site regularly.

!

Always insert the correct memory card into the appropriate memory card slot.

Do not attempt to insert a different memory card or memory card adapter into a different memory card slot. An incompatible memory card or adapter 
may be difficult to remove from the wrong slot and can cause damage your computer.

Use care when inserting or removing a memory card from the slot. Do not force the memory card in or out of the slot.

Summary of Contents for VAIO VGC-RC110G Series





















































































































































































Reviews: