background image

47

n

N

Using Your VAIO Computer

Copying Files to CDs

To determine which type of CD your computer supports, see Reading and Writing CDs and DVDs 

(page 44)

.

To copy files to a CD-RW or CD-R

!

Do not strike or shake the computer while writing data onto a disc.

1

Insert a blank CD-R or CD-RW disc into the optical disc drive.
If the CD Drive window appears, click Take no action.

2

Open Windows Explorer by pressing the Windows key and the E key simultaneously.

3

In the Folders panel on the left, locate the file(s) or folder(s) you want to copy and either:

Right-click the file(s) or folder(s), point to Send To, and click the optical disc drive

*

 name.

Drag the file(s) or folder(s) onto the optical disc drive icon in the Files Stored on This Computer panel.

4

Close Windows Explorer.

5

Click Start and then My Computer.

6

Click the optical disc drive icon under Devices with Removable Storage. A new window appears with the file(s) or 
folder(s) you want to copy listed under Files Ready to Be Written to the CD.

7

In the CD Writing Tasks box, click Write these files to CD

8

Follow the instructions in the CD Writing Wizard.

*

The read/write drive letter designation may vary, depending on your system's hardware configuration.

 

Summary of Contents for VAIO VGC-RC110G Series





















































































































































































Reviews: