Sony VAIO VGC-RC110G Series User Manual Download Page 159

Page: 159 / 180

159

Troubleshooting

Why can't I hear sound from my speakers?

❑

If you are using a program that has its own volume control, make sure the volume control is properly set. See that
program's help guide for more information.

❑

Your speakers may be set to mute, the volume setting may be too low, or the audio option may be disabled.

❑

The speaker volume may have been turned off. Press the Mute button on the keyboard.

❑

The keyboard also has a volume control, make sure the volume is turned up loud enough to hear sound.

❑

Check the volume controls in Windows.

Click Start and then Control Panel.

Click Sounds, Speech, and Audio Devices.

Select the Sound Reality item and change the settings.

Summary of Contents for VAIO VGC-RC110G Series





















































































































































































Search results

Summary of Contents for VAIO VGC-RC110G Series

Reviews:

Related manuals for VAIO VGC-RC110G Series

Brands by name

Popular brands

Sony VAIO VGC-RC110G Series, User Manual

Search results

Summary of Contents for VAIO VGC-RC110G Series

Reviews:

Related manuals for VAIO VGC-RC110G Series

Brands by name

Popular brands