Sony VAIO VGC-RA940GN3 User Manual Download Page 88

Page: 88 / 201

Using Your VAIO Computer

Removing a Memory Stick Media

To remove a Memory Stick media

Check that the Media Access indicator light is off.

Push in the Memory Stick media toward the computer.
The Memory Stick media ejects.

Pull the Memory Stick media out of the slot.

Always remove the Memory Stick media gently, or it may pop out unexpectedly.

Do not remove the Memory Stick media while the Media Access indicator light is on. If you do, you may lose data. Large volumes of data may take time

to load, so be sure the indicator is off before removing the Memory Stick media.

Summary of Contents for VAIO VGC-RA940GN3










































































































































































































Search results

Summary of Contents for VAIO VGC-RA940GN3

Reviews:

Related manuals for VAIO VGC-RA940GN3

Brands by name

Popular brands

Sony VAIO VGC-RA940GN3, User Manual

Search results

Summary of Contents for VAIO VGC-RA940GN3

Reviews:

Related manuals for VAIO VGC-RA940GN3

Brands by name

Popular brands