Using Peripheral Devices
Connecting to a Network (LAN)
You can connect your computer to 100BASE-TX/10BASE-T-type networks with an Ethernet network cable. Connect one end
of a network cable (not supplied) to the network (Ethernet) port on the back of the computer and the other end to your network.
For detailed settings and devices needed to connect to the network, ask your network administrator.
✍
You need to remove the back panel cover from the computer to access the network (Ethernet) port. See
Removing and Replacing the Back Panel
Cover
for the procedure.
✍
Your computer can be connected to the network with the default settings.
