Sony V
A
IO
Desktop User
Guide
Using your VAIO desktop
26
Using the remote control
Your VAIO comes with a remote control with which you can control Giga Pocket, VAIO Media, SonicStage
and PowerDVD for VAIO. Before you can use the remote control, you must insert two AA alkaline batteries
and connect the infrared receiver.
Inserting the batteries and connecting the infrared receiver
To insert the batteries, proceed as follows:
1
Slide the battery cover in the direction of the arrow.
2
Insert two AA alkaline batteries into the battery bay, matching the polarities (+ to +, - to -).
3
Close the battery cover and slide it securely back into place.
To connect the supplied USB infrared receiver, simply plug the end of
its USB cable into one of the computer’s USB ports, as shown:
✍
When using the remote control, always point it directly at the receiver.
This illustration may not correspond entirely to the configuration of your model. Please check the
section
Back Panel
of your printed
Specifications
sheet to see where the ports are exactly.
