manualshive.com logo in svg

Sony VAIO PCG-V505CP, Hardware Manual

Share
Download
Sony VAIO PCG-V505CP Hardware Manual Download Page 32

H

a

rd

w

a

re

 G

u

id

e

Using your VAIO computer

31

n

N

Using PC Cards

Your computer includes a PC Card slot. PC Cards allow you to connect portable external devices.

You do not need to shut down your computer when inserting a PC Card.

Inserting a PC Card

To insert a PC Card, proceed as follows:

1

Insert the PC Card into one of the PC Card slots with the front label facing upwards.

 

2

Gently push the PC Card slot into the connector.
The PC Card is automatically detected by your system.
The 

Safely Remove Hardware

 icon appears in the system tray.

✍

Some devices may not function properly if you repeat returning to 

Normal 

mode from 

Standby

 mode or 

Hibernate

 mode.

The computer will return to its original state if you restart it.

Some PC Cards may require you to disable idle devices when using the PC Card. You can use Sony computer Setup to disable devices. 

Make sure you use the most recent software driver provided by the PC Card manufacturer.

If an “!” mark appears on the 

Device Manager

 tab in the 

System Properties

 dialog box, remove the software driver and then reinstall it.

You do not need to shut down the computer before inserting or removing a PC Card.

Summary of Contents for VAIO PCG-V505CP





























































































Reviews:

No comments

Brands by name

Popular brands

Load more brands