manualshive.com logo in svg

Sony VAIO PCG-GR2515G, User Manual

Share
Download
Sony VAIO PCG-GR2515G User Manual Download Page 91

Sony 

Notebook U

s

er Guide

Getting help

90

n

N

❑

If you have plugged the computer into a UPS (Uninterruptible Power Supply), make sure the UPS is 
turned on and works.

❑

If you are using an external display, check that it is plugged into a power source and turned on. Check 
that you have switched to the external display and that the brightness and contrast controls are adjusted 
correctly.

❑

Moisture condensation may have occurred. Leave the computer off for at least one hour and then turn 
it on.

❑

When the internal backup battery is low on power, it may not be able to start your system properly. Leave 
the unit for a while until the battery is recharged, then try to start it.

The message 'Press <F1> to resume, <F2> to setup' appears at startup

If the floppy disk drive is empty, proceed as follows to initialise the BIOS:

1

Turn off the computer.

2

Remove any peripheral devices connected to the computer.

3

Turn on the computer and press 

<F2>

 when the Sony logo appears.

The BIOS setup menu screen appears.

4

Set the date (month/day/year).

5

Press 

Enter

.

6

Press the arrow keys to select 

System Time

.

7

Set the time (hour:minute:second).

8

Press 

Enter

.

9

Press the arrow keys to select the 

Exit

 menu.

10

Press the arrow keys to select 

Get Default Values 

and then press 

<Enter>

. The message 

Load default 

configuration now?

 appears.

11

Make sure that 

Yes

 is selected and then press 

<Enter>

.

Summary of Contents for VAIO PCG-GR2515G


























































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands