Sony URX-P40 Operating Instructions Manual Download Page 7

Page: 7 / 56

Models available separately

The transmitter and tuner in each package are available
for purchase separately. The components provided with
each product are given below.

UTX-B40

• Body-pack transmitter (UTX-B40) (1)
• Omni-directional lavalier microphone (1)
• Wind screen (1)
• Holder clip (1)
• Belt clip (1)
• Before Use (1)
• Warranty card (1) (UC, U, LA, KR models only)

UTX-M40

• Hand-held microphone (UTX-M40) (1)
• Microphone holder (1)
• Before Use (1)
• Warranty card (1) (UC, U, LA, KR models only)

UTX-P40

• Plug-on transmitter (UTX-P40) (1)
• Soft case (1)
• Before Use (1)
• Warranty card (1) (UC, U, LA, KR models only)

URX-P40

• Portable diversity tuner (URX-P40) (1)
• Shoe mount adaptor (1)
• Belt clip (1)
• XLR-BMP conversion output cable for the URX-P40

URX-P41D (1)

• Stereo mini plug-BMP conversion cable for the

URX-P40 (1)

• Before Use (1)
• Warranty card (1) (UC, U, LA, KR models only)

URX-P41D

• Portable diversity tuner (URX-P41D) (1)
• Shoe mount adaptor (1)
• Belt clip (1)
• XLR-BMP conversion output cable for the URX-P40/

URX-P41D (2)

• Stereo mini plug-BMP conversion cable for the

URX-P41D (1)

• Before Use (1)
• Warranty card (1) (UC, U, LA, KR models only)

Summary of Contents for URX-P40

























































Search results

Summary of Contents for URX-P40

Reviews:

Related manuals for URX-P40

Brands by name

Popular brands

Sony URX-P40, Operating Instructions Manual

Search results

Summary of Contents for URX-P40

Reviews:

Related manuals for URX-P40

Brands by name

Popular brands