Op
erat
io
n
Scanning Pictures and Printing
12
2
Touch the [OK] button.
The next screen allows you to verify your order.
Verifying the Order and Entering a
Password
You must enter a password to print. The default
password is the sales clerk password, “0000”.
Note
You can use the Administration screen to set whether a
password must be entered and to change passwords.
For details, see “[System] Tab” (page 43).
1
Verify the order, and then touch the [Check Out]
button.
The password entry screen appears.
Note
If you used the Administration screen to set
printing without password entry, the screen in step
1 of “Output” (see below) appears.
2
Touch the appropriate keys to enter the password.
If you need to cancel password entry and start
again, touch the [Clear] button.
Output
1
Touch the [Enter] button.
The print job starts and the following screen
appears.
After a moment, the display returns to the screen in
step 1 of “Selecting the Scanner as the Input
Device” (page 10).
Notes
• If you use the Administration screen to set the
unit to inhibit all other operations during printing
([Background Printing] off), the “Thank you”
screen does not appear until printing ends, and
then returns to the screen in step 1 of “Selecting
the Scanner as the Input Device” (page 10),
effectively preventing the user from performing
other operations during printing.
• A receipt is printed if a receipt printer is
connected to the unit and settings necessary for
printing receipts have been made within the
Administration screen. When output finishes, the
receipt is automatically printed.
