Sony UP-D898MD, Instructions For Use Manual

Page: 11 / 31

Get
ting St
ar
te
d
Paper
11
Connecting to the USB Connector
Installing the Printer Driver to the
Computer
When you use Windows XP/Windows Vista:
After connecting this unit to the computer, turn on this
unit. For installing, see the Install Guide of the supplied
CD-ROM and the Readme file.
When you use Windows 7/8:
Before connecting this unit to the computer, install the
supplied printer driver to the computer. For installing,
see the Install Guide of the supplied CD-ROM and the
Readme file.
Note
When this unit is turned on, do not make the computer
which is connected to this unit standby (suspended) or
pause mode. It may occur the malfunction.
Paper
Use only Sony UPP-110S/110HD/110HG paper
designed for use with this unit. High print quality cannot
be guaranteed if any other paper is used with this unit,
and such paper could damage the unit.
You cannot use the UPP-110HA as specified for the
UP-D890 series printer.
Paper You Can Use
Print paper characteristics are as follows.
Notes on storing and handling paper
Do not re-use
Doing so may result in malfunction and
negatively affect printing results.
Storing unused paper
• Store unused paper at a temperature below 30°C
(86°F) in a dry location that is not exposed to direct
sunlight.
• Do not store unused paper near volatile liquids or
allow the paper to contact any organic volatile liquid,
cellophane tape, or any compound of vinyl chloride.
Loading paper
• Handle the paper carefully when loading not to touch
the printing surface with your fingers.
Inspection gel, fingerprints or perspiration could cause
pictures to blur.
• After removing the label from the leading edge of the
paper, pull the paper out 15 - 20 cm (6 - 8 in) before
printing. Label adhesive remaining on the paper could
spoil a picture.
• If you reuse paper that has been removed once, pull
out 15 – 20 cm (6 – 8 in) before printing. If the dust,
etc. exists, it could spoil a picture.
Storing printouts
• To prevent printouts from fading or changing color,
store them in a cool, dry location where the
temperature is not higher than 30°C (86°F).
• Store printouts in a polypropylene pouch or between
sheets of paper that contain no plastic.
• Do not store printouts where they will be exposed to
direct sunlight or high humidity.
• Do not store printouts near volatile liquids or allow the
prints to contact any organic volatile liquid,
cellophane tape, or any compound of vinyl chloride.
• To prevent fading, do not stack printouts on or under a
diazo copy sheet.
to USB connector
USB cable
(sold separately)
UP-D898MD
Print Characteristics Paper Type
TYPE I (Normal) UPP-110S
TYPE II (High Density) UPP-110HD
TYPE V (High Glossy) UPP-110HG