19
Operation
Printing
Before printing
• Ensure that the printer is properly connected to the computer (page 10).
• Ensure that the combination of the ink ribbon and print paper is correct (pages 14
and 17).
• Ensure that the ink ribbon cassette and print paper are properly loaded (page 30).
i
1
Turn on the power of the printer and computer.
When the printer is in standby status, the following message appears in the
printer window display.
A 4
QT Y
1
RE ADY
Notes
• When the printer is connected to the computer through the SCSI bus, turn on
the power of the printer before turning on the computer.
• Never turn the printer on or off while the computer is accessing its hard disk,
floppy disk or another SCSI device.
2
Send the image data from the computer to the printer, then enter the print
command or press the PRINT button of the printer.
For details, also see the ReadMe file on the supplied CD-ROM.
1
While the printer is receiving the image data from the computer, the
following message appears:
The data is written in the memory of the printer.
RGB
[
>>>
]
I MAGE T RANS F ER
Printer window display
Paper outlet
1
2
STOP button
Number of copies to be printed
The size of the paper being loaded
Indicates the data is being transmitted.
(Continued)
