29
Displaying the Administration Screen
Attaching the Output Cover
Attach the output cover to the output tray. Doing so
prevents minor cuts and injuries that may result from
printouts ejecting quickly out of the output slot while
printing.
To attach the output cover
Displaying the
Administration Screen
Proceed as follows to display the administration screen.
• Before you can make settings on the administration
screen, you must enter the administrator password. In the
factory default condition, the administrator password is
set to “9999.”
• If a memory card is inserted in any of the front-side
memory card slots of the unit, the administration screen
does not come up. Remove any memory cards first, and
then repeat the procedure.
1
At the Start Guide display, touch the top left corner of
the screen twice in succession.
The password entry screen appears.
2
Enter the administrator password using the numeric
keypad.
Notes
Summary of Contents for UP-CR25L
Page 117: ......
